This wall barre offers the ability to adjust the top of barre height for both barres for a truly custom barre system. Aluminum crossbars allow for an easy to clean surface.
A High Quality Wall Mounted Barre
Our adjustable wall mounted systems allow for plenty of adjustment so you can find the right height for your needs. Not designed to adjust daily.
Specifications
• 1-1/2” and diameter aluminum barres are powder coated Satin Silver and supplied with black endcaps.
• Brackets are made of heavy gauge steel and feature a light textured matte black finish or glossy white.
• Slide tracks and brackets are made of heavy gauge steel and feature a textured black powder finish.
• Adjustable Slide Track is 1-5/8” wide x 40” tall and allows for 36” of height adjustment.
• Bracket mount plate is 1-1/2” wide x 4” tall
• Distance from mounting surface to center of barre is approximately 9”.
• From center of 4” mount plate to the top of the barre is 5-1/2”
• Barres supports 100 lbs. per linear foot of static weight when properly installed.
• Barres are cut ½” shorter than stated length: 4’ = 47.5”, 5’=59.5”, 6’=71.5”,7’=83.5”, 8’=95.5”
Installation
• Longer length barre systems over 8' ship in multiple barre sections.
• The number of brackets required depends on the length of the barre.
• Barre sections must be joined on the brackets. Other brackets may be placed anywhere on the barre but 4’ spacing is recommended.
• Our stock systems are configured for our recommended 4’ bracket spacing. In some cases, bringing the end brackets in a few inches to allow for some barre overhang may cause the bracket spacing to be less than 4’ on each end. You may need to purchase a longer barre system.
• The use of a backerboard securely mounted to the wall is recommended so that the brackets may be mounted at the required spacing.
• Slide tracks/brackets may be placed anywhere along the barre length; however, a slide track/bracket is required wherever barres are joined.
• Systems include all components and hardware needed for basic installation.
• When barres meet in a corner take 1’ off each barre dimension so barres do not touch in the corner.
• Screws are provided for use underneath each bracket collar to secure the barres.
• Allow at least 2’ per person or more depending on the activity.
• Ballet barres are typically mounted at 42” top of barre height, 42” and 32” for double barres.
