The perfect fitness floor mounted system is in front of you! With heavy duty construction and a high quality powder coated finish, this system will last for many years to come.
A high quality floor mounted barre system
Our fitness floor mounted systems are made with heavy duty materials and top notch craftsmanship. Our added support gusset on the back side of the stanchion
ensures years of use with no wobble or flex when properly mounted.
Specifications
• Barres are natural un-finished wood 1-1/2” or 1-3/4" diameter, sanded smooth – ideal for hands of all sizes.
• Our wood barre material is sourced in the USA.
• Floor stanchions are made of heavy gauge steel and feature a powder coated finish and have an added support brace on the back for additional strength needed for barre fitness.
• Baseplate to top of barre heights are 42” and 32”
• Stanchion baseplate is 6” x 6” and has (4) 1/2" diameter holes, so you will need to use 3/8" diameter anchors.
• The distance from the rear edge of the floor stanchion to the front of the barre is approximately 7"
• Barres supports 150 lbs. per linear foot of static weight when properly installed.
Installation
• Longer length barre systems over 8' ship in multiple barre sections.
• The number of brackets required depends on the length of the barre.
• Barres are joined together inside the stanchion collars for a continuous length look.
• Our stock systems are configured for our recommended 4’ floor stanchion spacing. In some cases, bringing the end stanchions in a few inches to allow for some barre overhang may cause the stanchion spacing to be less than 4’ on each end. You may need to purchase a longer barre system.
• Floor stanchions may be placed anywhere along the barre length; however, a stanchion is required wherever barres are joined.
• Hardware for mounting into the floor is not provided as it will depend entirely on your floor type and what your installer feels will mount most securely. Hardware may be purchased at a local hardware or home improvement store.
• When barres meet in a corner take 1’ off each barre dimension so barres do not touch in the corner.
• Wood screws are provided for use underneath each bracket collar to secure the barres.
• Allow at least 2’ per person or more depending on the activity.
