Our adjustable single bar wall system offers a lot of flexibility with the included slide track. The top of barre height on this wall barre can be set to a custom height of your choice.
A High Quality Wall Mounted Barre
Our adjustable wall mounted systems allow for plenty of adjustment so you can find the right height for your needs. Not designed to adjust daily.
Specifications
• 1-1/2” and diameter aluminum barres are powder coated Satin Silver and supplied with black endcaps.
• Slide tracks and brackets are made of heavy gauge steel and feature a textured black powder finish or glossy white.
• Adjustable Slide Track is 1-5/8” wide x 40” tall and allows for 36” of height adjustment.
• Bracket mount plate is 1-1/2” wide x 4” tall.
• Distance from mounting surface to center of barre is approximately 9”.
• From center of 4” mount plate to the top of the barre is 5-1/2”
• Barres supports 100 lbs. per linear foot of static weight when properly installed.
• Please note: Though the barres are adjustable, they are not designed for frequent adjustments (i.e. daily adjustments) Depending on the length, adjusting the height of our adjustable wall mounted ballet barre systems may require the use of two or more individuals. 7/16" wrench is required.
Installation
• Longer length barre systems over 8' ship in multiple barre sections.
• The number of slide tracks & brackets required depends on the length of the barre.
• Barres are joined together inside the bracket collars for a continuous length look.
• Our stock systems are configured for our recommended 4’ bracket spacing. In some cases, bringing the end brackets in a few inches to allow for some barre overhang may cause the bracket spacing to be less than 4’ on each end. You may need to purchase a longer barre system.
• The use of a backerboard securely mounted to the wall is recommended so that the brackets may be mounted at the required spacing.
• Slide tracks/brackets may be placed anywhere along the barre length; however, a slide track/bracket is required wherever barres are joined.
• Systems include all components and hardware needed for basic installation.
• Spring nuts are used to attach the brackets to the adjustable slide tracks.
• When barres meet in a corner take 1’ off each barre dimension so barres do not touch in the corner.
• Screws are provided for use underneath each bracket collar to secure the barres.
• Allow at least 2’ per person or more depending on the activity.
• Ballet barres are typically mounted at 42” top of barre height, 42” and 32” for double barres.
• Barres for barre fitness are typically mounted between 36” and 40” top of barre height.
